BV Series VANE PUMPS 01 13
Versatility, power, compactness and low running costs Versatility, power, compactness and low running costs are the main characteristics of this range of vane pumps. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. The cartridge contains a rotor, vanes and inserts, a cam ring and two covers. During operation the rotor is driven by a splined shaft coupled to the drive unit. As the rotation speed increases, centrifugal forces, in combination with the pressure generated behind the vanes, push the vanes outwards, where they follow the profile of the cam of the ring with a sufficient contact pressure to ensure adequate hydraulic sealing. The two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads on the shaft bearings, thereby giving them extremely long lifetimes. The versatility of this series of pumps enables them to meet the requirements of the most varied industrial applications. In fact, as well as their proven high reliability and excellent volumetric efficiency in all working conditions, they operate with particularly low noise levels. This is made possible by the special profile of the cam ring and the use of a 12 vane rotor that reduces the amplitude of the supply pressure pulses, thereby reducing induced vibrations. These vane pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings. This makes them very easy to install and guarantees their interchangeability with other similar pumps (eg. Vickers, Caterpillar, Denison). More detailed technical information is available from jbj Techniques Limited. jbj Techniques technical office, telephone: 01737 767493 email: info@jbj.co.uk www.jbj.co.uk/vanepumps.html ii www.jbj.co.uk/vane-pumps.html #DriveLineHarmony
Hydraulic Vane Pumps Hydraulic Vane Pumps BV Series Single pumps BV01. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Single pumps BV02. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11 Single pumps BV04. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18 Single pumps BV05. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25 Double pumps BV21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32 Double pumps BV41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 42 Double pumps BV42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 52 Double pumps BV51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 61 Double pumps BV52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 71 Double pumps BV54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 80 Id. codes of cartridge kit components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 89 Operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 91 iii www.jbj.co.uk/vane-pumps.html #DriveLineHarmony The details contained within this catalogue are reproduced in accordance with the latest information at publication of this catalogue. Errors & Omissions Excepted Last update: 30/01/2013
BD SERIES Fixed displacement high pressure hydraulic vane pumps. » three versions of single pump (from 10 to 227 l/min at 1000 rpm) » four versions of double pump (from 20 to 385 l/min at 1000 rpm) with input powers of over 328 kW at max pressure and speed. HD SERIES Fixed displacement high pressure hydraulic vane pumps. » single pump (from 11 to 99 l/min at 1000 rpm) » double pump (from 22 to 200 l/min at 1000 rpm) With maximum powers of over 126 kW at the max pressure and speed. BV SERIES Fixed displacement hydraulic vane pumps. » four versions of single pump (from 8 to 230 l/min at 1200 rpm) » six versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. BQ SERIES Fixed displacement hydraulic vane pumps. » five versions of single pump (from 8 to 230 l/min at 1200 rpm) » seven versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. TQ / TV SERIES Through-drive hydraulic vane pumps. Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five different displacements from 47 to 79 l/min at 1200 rpm and 7 bar. HQ SERIES Fixed displacement hydraulic vane pumps. » 2 versions of single pump (from 39 to 88 l/min at 1000 rpm) and » 2 versions of double pump (from 46 to 134 l/min at 1000 rpm) with Maximum powers of over 103 kW. B1 / B2 SERIES Fixed displacement hydraulic vane pumps. B1 pumps are available in eight different versions (from 4.5 to 31.8 l/pm at 1200 rpm), with maximum power of up to 18 kW. B2 pumps are available in seven different versions (from 27.27 to 59.09 l/pm at 1200 rpm), with maximum power of up to 27 kW. Hydraulic Vane Pumps High Pressure Hydraulic Vane Pump Types iv www.jbj.co.uk/vane-pumps.html #DriveLineHarmony
Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. The cartridge contains a rotor, vanes and inserts, a cam ring and two covers. During operation the rotor is driven by a splined shaft coupled to the drive unit. As the rotation speed increases, centrifugal forces, in combination with the pressure generated behind the vanes, push the vanes outwards, where they follow the profile of the cam of the ring with a sufficient contact pressure to ensure adequate hydraulic sealing. The two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads on the shaft bearings, thereby giving them extremely long lifetimes. The versatility of the BV series pumps enables them to meet the requirements of the most varied industrial applications. In fact, as well as their proven high reliability and excellent volumetric efficiency in all working conditions, they operate with particularly low noise levels. This is made possible by the special profile of the cam ring and the use of a 12 vane rotor that reduces the amplitude of the supply pressure pulses, thereby reducing induced vibrations (see drawing). The BV series is available in four versions of single pump (from 8 to 230 l/min at 1200 rpm) and six versions of double pump (from 55 to 370 l/min at 1200 rpm), with maximum powers of over 300 HP. The BV series pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings. This makes them very easy to install and guarantees their interchangeability with other similar pumps. FIXED DISPLACEMENT HYDRAULIC VANE PUMPS “BV” SERIES 2 BV
3 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in six versions with capacities from 8 to 55 l/min (from 2 to 14 gpm) at 1200 rpm and 7 bar. General description BV01 single pump Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil): from 13 to 860 cSt. (13 to 54 cSt. recommended). Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better). Inlet pressure: (with mineral oil): from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended), with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil V01-02 V01-05 V01-08 V01-09 V01-11 V01-12 V01-14 cm3/g 7,2 18,0 27,4 30,1 36,4 39,5 45,9 (in3/r) (0,44) (1.10) (1.67) (1.83) (2.22) (2.41) (2.79) l/min 8,3 20,8 31,8 35,1 42,4 46,9 54,9 (gpm) (2) (5) (8) (9) (11) (12) (14) l/min 10,4 26,1 39,4 44,1 52,6 58,7 69,6 (gpm) (2.8) (6.9) (10.4) (11.7) (13.9) (15.5) (18.4) bar 210 210 210 210 210 160 140 min 600 600 600 600 600 600 600 max 1800 1800 1800 1800 1800 1800 1800 (psi) (3050) (3050) (3050) (3050) (3050) (2300) (2030)
Sound level at 138 bar (2000 psi) velocità 58 60 62 64 66 68 70 dB(A) 1200 rpm 1500 rpm 1800 rpm If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Intake pipe pressure (BAR) max pressure / hydraulic fluid Antiwear industrial hydraulic oil Water glycol Water-in-oil emulsion Main operating data 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 12 14 12 14 2, 5, 8, 9, 11 2, 5, 8, 9, 11 12 14 2, 5, 8, 9, 11 4 single pump BV01 max pres. Peak pres. (0,5 sec.max) 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 max speed / hydraulic fluid (with 0 bar in the intake pipe)
5 single pump BV01 Cartridge V01-02 flow / pressure PSI l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 power / pressure 3 5 7 8 5,44 2,72 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cartridge V01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 80 40 20 0 NM BAR 50 60 power / pressure KW 0 2 4 6 8 10 12 14 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 18 flow / pressure PSI l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 2,6 40 30 25 20 5 1200 rpm 1500 rpm 1800 rpm 2500 rpm
6 BV01 single pump Cartridge V01-08 flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 BAR 70 15,6 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR 18,2 10,4 2,6 34 Cartridge V01-09 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 30 20,4 13,6 6,8 40,8 25 34
7 BV01 single pump Cartridge V01-11 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 150 50 0 NM BAR 50 100 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 34 20,4 6,8 0 HP 0 50 100 150 200 250 30 35 flow / pressure PSI l/min GPM 90 70 30 20 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 21,2 15,9 10,6 0 0 50 100 150 200 250 5,3 80 60 50 40 10 1200 rpm 1500 rpm 1800 rpm 2500 rpm 40,8 27,2 13,6 Cartridge V01-12 flow / pressure PSI l/min GPM 90 30 10 0 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 70 10,4 60 40 20,8 BAR 100 KW 0 5 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 34 0 HP 0 50 100 150 200 power / pressure 15 20 25 30 27,2 20,4 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 50 0 NM 50 100 150 BAR 26 15,6 5,2 40,8 80 50 20 10 13,6
BV01 single pump 8 Installation dimensionsmm (inches) Approx. weight: 12 Kg. (26 lbs.) Cartridge V01-14 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 200 100 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 40,8 34 20,4 6,8 0 HP 0 50 100 150 200 30 flow / pressure PSI l/min GPM 120 80 20 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 31,8 21,2 10,6 0 0 50 100 150 200 5,3 100 60 40 1200 rpm 1500 rpm 1800 rpm 2500 rpm 27,2 13,6 26,5 15,9 50 PSI 0 1450 2175 2900 725
BV01 9 Model code breakdown BV 01 G * * * * * (L) * (A) Cartridge type 02 05 08 09 11 12 14 Rotation (viewed from shaft end) L= left hand rotaton CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard) 11= Splined 90= Splined SAE B Spline data (shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 single pump
BV01 10 single pump Id. codes of pump components Part No. M8010010 Body Part No. M8020420 Torque to 70 Nm (625 lb. in.) Screw Model 01 11 90 Shaft kit Part No. M8010601 M8010611 M8010690 Model 01 11 90 Shaft Key Part No. K0101000 K0111000 K0190000 Part No. M8010100 - - Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Part No. M8010030 Bearing Part No. M8020120 Cover Part No. M8010040 Seeger Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8010500 M8010501 M8010503 M8010504 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Part No. M8010050 Seeger Cartridge Series V01 V01 Model 02 05 08 09 11 12 14 02 05 08 09 11 12 14 Part No. V0102002 V0105015 V0108035 V0109055 V0111075 V0112095 V0114115 V0102007 V0105025 V0108045 V0109065 V0111085 V0112105 V0114125 Pump rotat. right hand left hand
11 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 47 to 79 l/min (from 12 to 21 gpm) at 1200 rpm and 7 bar. General description BV02 Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended),with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump V02-12 V02-14 V02-17 V02-19 V02-21 cm3/g 40,1 45,4 55,2 60,0 67,5 (in3/r) (2.45) (2.77) (3.37) (3.66) (4.12) l/min 46,9 52,7 64,2 71,0 79,0 (gpm) (12) (14) (17) (19) (21) l/min 58,8 65,7 80,2 88,7 99,8 (gpm) (15.5) (17.4) (21.2) (23.4) (26.4) bar 175 175 175 175 175 min 600 600 600 600 600 max 1800 1800 1800 1800 1800 (psi) (2538) (2538) (2538) (2538) (2538)
BV02 single pump 12 max pressure / hydraulic fluid Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol max pres. Peak pres. (0,5 sec.max) Water-in-oil emulsion If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure Main operating data 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 max speed / hydraulic fluid (with 0 bar in the intake pipe) Intake pipe pressure (BAR) Sound level at 138 bar (2000 psi) speed 58 60 62 64 66 68 70 dB(A) 1200 rpm 1500 rpm 1800 rpm
13 BV02 single pump Cartridge V02-12 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 200 100 50 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 30 BAR PSI 0 725 1450 2175 2900 3625 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 27,2 13,6 0 HP 0 50 100 150 200 250 35 40 flow / pressure PSI l/min GPM 100 80 40 30 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 26 20,8 15,6 0 0 50 100 150 200 250 5,2 90 70 60 50 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 10 10,4 2500 rpm Cartridge V02-14 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 15 40 50 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 150 200 BAR 31,2 15,6 68 45 30 25 35 20 50 1000 rpm
14 BV02 single pump Cartridge V02-17 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 250 150 50 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 60 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 36,4 31,2 26 0 0 50 100 150 200 250 5,2 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 15,6 100 20,8 10,4 30 54,4 27,2 100 Cartridge V02-19 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 40 60 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 200 250 BAR 31,2 15,6 81,6 30 20 50 140 160 36,4 41,6 50 68 150
BV02 single pump 15 Installation dimensionsmm (inches) Approx. weight: 15 Kg. (33 lbs.) Cartridge V02-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 200 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 21 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 10,5 100 160 180 300 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 70 30 54,4 27,2 60 95,2
BV02 16 Model code breakdown BV 02 G * * * * * (L) * (A) Cartridge type 12 14 17 19 21 Rotation (viewed from shaft end) L= left hand rotaton CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE B Spline data (shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BV02 17 single pump Id. codes of pump components Part No. M8020010 Body Part No. M8020030 Bearing Part No. M8020050 Seeger Part No. M8020040 Seeger Part No. M8020020 Cover Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8020500 M8020501 M8020503 M8020504 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series V02 V02 Model 12 14 17 19 21 12 14 17 19 21 Part No. V0212030 V0214070 V0217110 V0219150 V0221190 V0212040 V0214080 V0217120 V0219160 V0221200 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8020601 M8020611 M8020686 M8020690 Model 01 11 86 90 Shaft Key Part No. K0201000 K0211000 K0286000 K0290000 Codice N° M8010100 - M8028600 - Part No. M8020070 Torque to 102 Nm (910 lb. in.) Screw
18 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 80 to 140 l/min (from 21 to 38 gpm) at 1200 rpm and 7 bar. General description BV04 Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended),with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump V04-21 V04-25 V04-30 V04-35 V04-38 cm3/g 69,0 81,6 97,7 112,7 121,6 (in3/r) (4.2) (5) (6) (6.9) (7.4) l/min 79,5 94,0 113,8 131,6 139,9 (gpm) (21) (25) (30) (35) (38) l/min 101,4 120,1 141,2 167,2 177,3 (gpm) (26.8) (31.7) (37.3) (44.1) (46.8) bar 175 175 175 175 175 min 600 600 600 600 600 max 1800 1800 1800 1800 1800 (psi) (2538) (2538) (2538) (2538) (2538)
BV04 single pump 19 max pressure / hydraulic fluid Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol max pres. peak pres. (0,5 sec.max) Water-in-oil emulsion max speed / hydraulic fluid (with 0 bar in the intake pipe) If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure Main operating data 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 % correction factor for the max speed 110% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 108% 106% Intake pipe pressure (BAR) Sound level at 138 bar (2000 psi) speed 60 62 64 66 68 70 dB(A) 1200 rpm 1500 rpm 1800 rpm
20 BV04 single pump Cartridge V04-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 300 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 0 HP 0 50 100 150 200 250 50 80 flow / pressure PSI l/min GPM 180 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 21 10,5 30 54,4 27,2 100 140 160 70 60 Cartridge V04-25 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 power / pressure 10 40 90 54,4 27,2 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 300 400 BAR 39,6 30 20 200 250 52,8 66 50 108,8 200 60 80 70
21 BV04 single pump Cartridge V04-30 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 136 0 HP 0 50 100 150 200 250 120 flow / pressure PSI l/min GPM 250 50 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 66 39,6 0 0 50 100 150 200 250 150 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 26,4 13,2 81,6 27,2 200 200 60 52,8 80 100 108,8 54,4 Cartridge V04-35 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 power / pressure 40 120 54,4 27,2 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM 50 400 600 BAR 39,6 20 200 300 52,8 79,2 136 200 60 100 250 66 80 108,8
BV04 single pump 22 Installation dimensionsmm (inches) Approx. weight: 23 Kg. (50 lbs.) Cartridge V04-38 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 140 flow / pressure PSI l/min GPM 50 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 79,2 52,8 26,4 0 0 50 100 150 200 250 200 1200 rpm 1500 rpm 1800 rpm 2400 rpm 100 13,2 54,4 27,2 300 60 190,4 600 150 39,6 80 200 250 66 100 120 163,2 136 108,8
BV04 23 Model code breakdown BV 04 G * * * * * (L) * (A) Cartridge type 21 25 30 35 38 Rotation (viewed from shaft end) L= left hand rotaton CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE C Spline data (shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 14 Pitch 12/24 Major dia. 31.60 - 31.50 (1.244 - 1.240) Pitch dia. 29.634 (1.1667) Minor dia. 26.99 - 26.66 (1.0627 - 1.05) Wildhaber 15.68 - 15.73 (0.617 - 0.619) Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BV04 24 single pump Id. codes of pump components Part No. M8040140 Body Part No. M8040160 Bearing Part No. M8040180 Seeger Part No. M8040170 Seeger Part No. M8040150 Cover Part No. M8040200 Torque to 225 Nm (2010 lb. in.) Screw Part No. M8040190 M8040195 M8040191 M8040196 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8040500 M8040501 M8040503 M8040504 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series V04 V04 Model 21 25 30 35 38 21 25 30 35 38 Part No. V0421030 V0425070 V0430110 V0435150 V0438190 V0421040 V0425080 V0430120 V0435160 V0438200 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8040601 M8040611 M8040686 M8040690 Model 01 11 86 90 Shaft Key Part No. K0401000 K0411000 K0486000 K0490000 Part No. M8040100 - M8048600 -
25 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 164 to 230 l/min (from 42 to 60 gpm) at 1200 rpm and 7 bar. General description BV05 Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended),with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump V05-42 V05-47 V05-50 V05-57 V05-60 cm3/g 138,6 153,5 162,2 183,4 193,4 (in3/r) (8.46) (9.4) (9.9) (11.2) (11.8) l/min 164 180 189 217 230 (gpm) (42) (47) (50) (57) (60) l/min 203,4 222,7 234 267 285 (gpm) (53.7) (58.8) (61.8) (71.2) (75.3) bar 175 175 175 175 175 min 600 600 600 600 600 max 1800 1800 1800 1800 1800 (psi) (2538) (2538) (2538) (2538) (2538)
BV05 single pump 26 max pressure / hydraulic fluid Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol max pres. peak pres. (0,5 sec.max) Water-in-oil emulsion max speed / hydraulic fluid (with 0 bar in the intake pipe) If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure Main operating data 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 % correction factor for the max speed 120% 115% 110% 105% 100% 95% 90% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Intake pipe pressure (BAR) Sound level at 138 bar (2000 psi) speed 64 66 68 70 72 dB(A) 1200 rpm 1500 rpm 1800 rpm
27 BV05 single pump Cartridge V05-42 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 135 0 HP 0 50 100 150 200 100 flow / pressure PSI l/min GPM 300 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 79,2 39,6 0 0 50 100 150 200 150 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 26,4 13,2 81 27 200 200 60 52,8 80 90 108 54 250 66 10 30 50 70 Cartridge V05-47 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,3 0 HP 0 50 100 150 200 power / pressure 40 120 54,2 27,1 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM 50 400 600 BAR 39,6 20 200 350 52,8 92,4 135,5 200 60 100 250 66 80 108,4 300 79,2 162,6
28 BV05 single pump Cartridge V05-50 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 162,6 0 HP 0 50 100 150 200 120 flow / pressure PSI l/min GPM 350 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 92,4 39,6 0 0 50 100 150 200 150 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 26,4 13,2 81,3 27,1 200 200 60 52,8 80 108,4 54,2 250 66 300 79,2 100 135,5 Cartridge V05-57 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 68 0 HP 0 50 100 150 200 power / pressure 25 125 34 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM 50 400 600 BAR 39,6 200 400 52,8 105,6 136 200 50 100 250 66 75 102 300 79,2 170 350 92,4
BV05 single pump 29 Installation dimensionsmm (inches) Approx. weight: 34 Kg. (75 lbs.) Cartridge V05-60 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 140 flow / pressure PSI l/min GPM 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 118,8 52,8 26,4 0 0 50 100 150 200 200 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 13,2 54,4 27,2 450 60 190,4 600 150 39,6 80 200 250 66 100 120 163,2 136 108,8 300 400 105,6 92,4 79,2 350
Spline data (shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 14 Pitch 12/24 Major dia. 31.60 - 31.50 (1.244 - 1.240) Pitch dia. 29.634 (1.1667) Minor dia. 26.99 - 26.66 (1.0627 - 1.05) Wildhaber 15.68 - 15.73 (0.617 - 0.619) BV05 30 Model code breakdown BV 05 G * * * * * (L) * (A) Cartridge type 42 47 50 57 60 Rotation (viewed from shaft end) L= left hand rotaton CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90 = Splined SAE C Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BV05 31 single pump Id. codes of pump components Part No. M8050250 Body Part No. M8050270 Bearing Part No. M8050310 Torque to 398 Nm (3550 lb. in.) Screw Part No. M8050300 M8050305 M8050301 M8050306 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8050500 M8050501 M8050503 M8050504 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series V05 V05 Model 42 47 50 57 60 42 47 50 57 60 Part No. V0542010 V0547030 V0550050 V0557070 V0560090 V0542020 V0547040 V0550060 V0557080 V0560100 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8050601 M8050611 M8050686 M8050690 Model 01 11 86 90 Shaft Key Part No. K0501000 K0511000 K0586000 K0590000 Part No. M8050100 - M8058600 - Part No. M8050290 Seeger Part No. M8050280 Seeger Part No. M8050260 Cover
BV21 double pump 32 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the cartridges used and the speed of rotation. The pump is available in several versions with rated capacities from 55 to 134 l/min (from 14 to 35 gpm) at 1200 rpm and 7 bar. General description Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended),with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil shaft end V02-12 V02-14 V02-17 V02-19 V02-21 cm3/g 40,1 45,4 55,2 60,1 67,5 (in3/r) (2.45) (2.77) (3.37) (3.66) (4.12) l/min 46,9 52,7 64,2 71,1 79,3 (gpm) (12) (14) (17) (19) (21) l/min 58,8 65,7 80,2 88,7 99,8 (gpm) (15.5) (17.4) (21.2) (23.4) (26.4) bar 175 175 175 175 175 min 600 600 600 600 600 max 1800 1800 1800 1800 1800 (psi) (2538) (2538) (2538) (2538) (2538) cover end V01-02 V01-05 V01-08 V01-09 V01-11 V01-12 V01-14 cm3/g 7,2 18,0 27,4 30,1 36,4 39,5 45,9 (in3/r) (0.44) (1.10) (1.67) (1.83) (2.22) (2.41) (2.79) l/min 8,3 20,8 31,8 35,1 42,4 46,9 54,9 (gpm) (2) (5) (8) (9) (11) (12) (14) l/min 10,4 26,1 39,4 44,1 52,6 58,7 69,6 (gpm) (2.8) (6.9) (10.4) (11.7) (13.9) (15.5) (18.4) bar 210 210 210 210 210 160 140 min 600 600 600 600 600 600 600 max 2700 2700 2700 2700 2700 2700 2700 (psi) (3050) (3050) (3050) (3050) (3050) (2300) (2030)
33 BV21 double pump Shaft end cartridge V02-12 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 200 100 50 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 30 BAR PSI 0 725 1450 2175 2900 3625 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 27,2 13,6 0 HP 0 50 100 150 200 250 35 40 flow / pressure PSI l/min GPM 100 80 40 30 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 26 20,8 15,6 0 0 50 100 150 200 250 5,2 90 70 60 50 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 10 10,4 2500 rpm If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed Main operating data max pressure / hydraulic fluid Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol max pres. peak pre. (0,5 sec.max) Water-in-oil emulsion 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 max speed / hydraulic fluid (with 0 bar in the intake pipe) speed 60 62 66 68 70 dB(A) Sound level at 138 bar (2000 psi) 64 max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8 1200 rpm 1500 rpm 1800 rpm
34 BV21 double pump Shaft end cartridge V02-14 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 15 40 50 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 150 200 BAR 31,2 15,6 68 45 30 25 35 20 50 1000 rpm Shaft end cartridge V02-17 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 250 150 50 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 60 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 36,4 31,2 26 0 0 50 100 150 200 250 5,2 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 15,6 100 20,8 10,4 30 54,4 27,2 100
35 BV21 double pump Shaft end cartridge V02-19 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 40 60 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 200 250 BAR 31,2 15,6 81,6 30 20 50 140 160 36,4 41,6 50 68 150 Shaft end cartridge V02-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 70 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 21 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 10,5 30 54,4 27,2 100 160 180 60 95,2 300
36 BV21 double pump Cartridge V01-02 flow / pressure PSI l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 power / pressure 3 5 7 8 5,44 2,72 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cartridge V01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 80 40 20 0 NM BAR 50 60 power / pressure KW 0 2 4 6 8 10 12 14 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 18 flow / pressure PSI l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 2,6 40 30 25 20 5 1200 rpm 1500 rpm 1800 rpm 2500 rpm
37 BV21 double pump Cartridge V01-08 flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 BAR 70 15,6 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR 18,2 10,4 2,6 34 Cartridge V01-09 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 30 20,4 13,6 6,8 40,8 25 34
38 BV21 double pump Cover end cartridge V01-11 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 150 50 0 NM BAR 50 100 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 34 20,4 6,8 0 HP 0 50 100 150 200 250 30 35 flow / pressure PSI l/min GPM 90 70 30 20 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 21,2 15,9 10,6 0 0 50 100 150 200 250 5,3 80 60 50 40 10 1200 rpm 1500 rpm 1800 rpm 2500 rpm 40,8 27,2 13,6 Cover end cartridge V01-12 flow / pressure PSI l/min GPM 90 30 10 0 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 70 10,4 60 40 20,8 BAR 100 KW 0 5 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 34 0 HP 0 50 100 150 200 power / pressure 15 20 25 30 27,2 20,4 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 50 0 NM 50 100 150 BAR 26 15,6 5,2 40,8 80 50 20 10 13,6
BV21 39 Installation dimensionsmm (inches) double pump Approx. weight: 20,5 Kg. (45 lbs.) Cover end cartridge V01-14 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 200 100 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 40,8 34 20,4 6,8 0 HP 0 50 100 150 200 30 flow / pressure PSI l/min GPM 120 80 20 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 31,8 21,2 10,6 0 0 50 100 150 200 5,3 100 60 40 1200 rpm 1500 rpm 1800 rpm 2500 rpm 27,2 13,6 26,5 15,9 50 PSI 0 1450 2175 2900 725
BV21 double pump 40 Model code breakdown BV 21 G ** ** * * ** (L) * (A) Cartridge types -shaft end 12 14 17 19 21 -cover end 02 05 08 09 11 12 14 Rotation (viewed from shaft end) L= left hand rotaton CCW (omit if CW) Pump type Body outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE B Cover outlet port positions (outlet viewed from cover end) A= Outlet 135° CCW from inlet B= Outlet 45° CCW from inlet C= Outlet 45° CW from inlet D= Outlet 135° CW from inlet Shaft optionsmm (inches) PORT ORIENTATIONS Spline data (shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 Shaft 86
BV21 double pump 41 Id. codes of pump components Part No. M8020010 Body Part No. M8020030 Bearing Part No. M8020050 Seeger Part No. M8020040 Seeger Part No. M8020420 Torque to 70 Nm (624 lb. in.) Screw Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8210500 M8210501 M8210503 M8210504 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Model 01 11 86 90 Shaft kit Part No. M8210601 M8210611 M8210686 M8210690 Model 01 11 86 90 Shaft Key Part No. K2101000 K2111000 K2186000 K2190000 Part No. M8010100 - M8028600 - Part No. M8020120 Cover Part No. M8020130 Torque to 102 Nm (910 lb. in.) Screw Part No. M8020110 Inlet body Cartridges Series V01 V01 Model 02 05 08 09 11 12 14 02 05 08 09 11 12 14 Part No. V0102000 V0105010 V0108030 V0109050 V0111070 V0112090 V0114110 V0102005 V0105020 V0108040 V0109060 V0111080 V0112100 V0114120 Series V02 V02 Model 12 14 17 19 21 12 14 17 19 21 Part No. V0212030 V0214070 V0217110 V0219150 V0221190 V0212040 V0214080 V0217120 V0219160 V0221200 Pump rotation right hand left hand cover end shaft end
42 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the cartridges used and the speed of rotation. The pump is available in several versions with rated capacities from 87 to 195 l/min (from 23 to 52 gpm) at 1200 rpm and 7 bar. General description Technical characteristcs Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil BV41 double pump shaft end V04-21 V04-25 V04-30 V04-35 V04-38 cm3/g 69,0 81,6 97,7 112,7 121,6 (in3/r) (4.2) (5) (6) (6.9) (7.4) l/min 79,5 94,0 113,8 131,6 139,9 (gpm) (21) (25) (30) (35) (38) l/min 101,4 120,1 141,2 167,2 177,3 (gpm) (26.8) (31.7) (37.3) (44.1) (46.8) bar 175 175 175 175 175 min 600 600 600 600 600 max 1800 1800 1800 1800 1800 (psi) (2538) (2538) (2538) (2538) (2538) Hydraulic fluids: antiwear high quality mineral oils or fire resistant fluid having same lubrication capacities of the mineral oil. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended),with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. cover end V01-02 V01-05 V01-08 V01-09 V01-11 V01-12 V01-14 cm3/g 7,2 18,0 27,4 30,1 36,4 39,5 45,9 (in3/r) (0.44) (1.10) (1.67) (1.83) (2.22) (2.41) (2.79) l/min 8,3 20,8 31,8 35,1 42,4 46,9 54,9 (gpm) (2) (5) (8) (9) (11) (12) (14) l/min 10,4 26,1 39,4 44,1 52,6 58,7 69,6 (gpm) (2.8) (6.9) (10.4) (11.7) (13.9) (15.5) (18.4) bar 210 210 210 210 210 160 140 min 600 600 600 600 600 600 600 max 2700 2700 2700 2700 2700 2700 2700 (psi) (3050) (3050) (3050) (3050) (3050) (2300) (2030)
www.jbj.co.ukRkJQdWJsaXNoZXIy NzQyNjQ=