BQ Series VANE PUMPS 01 13
Versatility, power, compactness and low running costs Versatility, power, compactness and low running costs are the main characteristics of this range of vane pumps. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. The cartridge contains a rotor, vanes and inserts, a cam ring and two covers. During operation the rotor is driven by a splined shaft coupled to the drive unit. As the rotation speed increases, centrifugal forces, in combination with the pressure generated behind the vanes, push the vanes outwards, where they follow the profile of the cam of the ring with a sufficient contact pressure to ensure adequate hydraulic sealing. The two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads on the shaft bearings, thereby giving them extremely long lifetimes. The versatility of this series of pumps enables them to meet the requirements of the most varied industrial applications. In fact, as well as their proven high reliability and excellent volumetric efficiency in all working conditions, they operate with particularly low noise levels. This is made possible by the special profile of the cam ring and the use of a 12 vane rotor that reduces the amplitude of the supply pressure pulses, thereby reducing induced vibrations. These vane pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings. This makes them very easy to install and guarantees their interchangeability with other similar pumps (eg. Vickers, Caterpillar, Denison). More detailed technical information is available from jbj Techniques Limited. jbj Techniques technical office, telephone: 01737 767493 email: info@jbj.co.uk www.jbj.co.uk/vanepumps.html ii www.jbj.co.uk/vane-pumps.html #DriveLineHarmony
Hydraulic Vane Pumps Hydraulic Vane Pumps BQ Series iii www.jbj.co.uk/vane-pumps.html #DriveLineHarmony The details contained within this catalogue are reproduced in accordance with the latest information at publication of this catalogue. Errors & Omissions Excepted Last update: 30/01/2013 page Single pumps BQ01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Single pumps BQ02. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Single pumps BQ03. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Single pumps BQ04. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Single pumps BQ05. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Double pumps BQ21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Double pumps BQ31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Double pumps BQ41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Double pumps BQ42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Double pumps BQ51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Double pumps BQ52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Double pumps BQ54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Id. codes of cartridge kit components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
BD SERIES Fixed displacement high pressure hydraulic vane pumps. » three versions of single pump (from 10 to 227 l/min at 1000 rpm) » four versions of double pump (from 20 to 385 l/min at 1000 rpm) with input powers of over 328 kW at max pressure and speed. HD SERIES Fixed displacement high pressure hydraulic vane pumps. » single pump (from 11 to 99 l/min at 1000 rpm) » double pump (from 22 to 200 l/min at 1000 rpm) With maximum powers of over 126 kW at the max pressure and speed. BV SERIES Fixed displacement hydraulic vane pumps. » four versions of single pump (from 8 to 230 l/min at 1200 rpm) » six versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. BQ SERIES Fixed displacement hydraulic vane pumps. » five versions of single pump (from 8 to 230 l/min at 1200 rpm) » seven versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. TQ / TV SERIES Through-drive hydraulic vane pumps. Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five different displacements from 47 to 79 l/min at 1200 rpm and 7 bar. HQ SERIES Fixed displacement hydraulic vane pumps. » 2 versions of single pump (from 39 to 88 l/min at 1000 rpm) and » 2 versions of double pump (from 46 to 134 l/min at 1000 rpm) with Maximum powers of over 103 kW. B1 / B2 SERIES Fixed displacement hydraulic vane pumps. B1 pumps are available in eight different versions (from 4.5 to 31.8 l/pm at 1200 rpm), with maximum power of up to 18 kW. B2 pumps are available in seven different versions (from 27.27 to 59.09 l/pm at 1200 rpm), with maximum power of up to 27 kW. Hydraulic Vane Pumps High Pressure Hydraulic Vane Pump Types iv www.jbj.co.uk/vane-pumps.html #DriveLineHarmony
Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. The cartridge contains a rotor, vanes and inserts, a cam ring, two flexible plates and two covers. During operation the rotor is driven by a splined shaft coupled to the drive unit. As the rotation speed increases, centrifugal forces, in combination with the pressure generated behind the vanes, push the vanes outwards, where they follow the profile of the cam with a sufficient contact pressure to ensure adequate hydraulic sealing. The two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads on the shaft bearings, thereby giving them extremely long lifetimes. The design characteristics of the BQ series pumps make them particularly suited to applications in the mobile field. The special design of the flexible plates enables any thermal expansion in the rotor to be compensated for and to adequately cope with any sudden change in pressure. Furthermore, the counterpressure chambers positioned between the flexible plates and the cartridge covers balance the internal pressure; this ensures that the correct clearance between the rotor and the flexible plates is always maintained so guaranteeing maximum volumetric efficiency (see drawing). The BQ series is available in five versions of single pump (from 8 to 230 l/min at 1200 rpm) and seven versions of double pump (from 55 to 370 l/min at 1200 rpm), with maximum powers of over 300 HP. The BQ series pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings. This makes them very easy to install and guarantees their interchangeability with other similar pumps. Flexible side plates Counter-pressure chambers FIXED DISPLACEMENT HYDRAULIC VANE PUMPS “BQ” SERIES 2 BQ
3 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in seven versions with capacities from 8 to 55 l/min (from 2 to 14 gpm) at 1200 rpm and 7 bar. General description BQ01 single pump Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil A01-02 A01-05 A01-08 A01-09 A01-11 A01-12 A01-14 cm3/g 7,2 18,0 27,4 30,1 36,4 39,5 45,9 in3/r) (0.44) (1.10) (1.67) (1.83) (2.22) (2.41) (2.79) l/min 8,3 20,8 31,8 35,1 42,4 46,9 54,9 (gpm) (2) (5) (8) (9) (11) (12) (14) l/min 10,4 26,1 39,4 44,1 52,6 58,7 69,6 (gpm) (2.8) (6.9) (10.4) (11.7) (13.9) (15.5) (18.4) bar 210 210 210 210 210 160 140 min 600 600 600 600 600 600 600 max 2700 2700 2700 2700 2700 2700 2700 (psi) (3050) (3050) (3050) (3050) (3050) (2300) (2030)
4 single pump BQ01 250 200 150 100 50 0 max pressure / hydraulic fluid BAR max speed / hydraulic fluid (with 0 bar in the intake pipe) 3000 2500 2000 1500 1000 500 0 RPM If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Main operating data 3625 2900 2175 PSI 1450 725 0 Intake pipe pressure (BAR) Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peak pres. (0,5 sec.max) Antiwear industrial hydraulic oil Syntetic fire resistant fluid
5 single pump BQ01 Cartridge A01-02 flow / pressure PSI l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 power / pressure 3 5 7 8 5,44 2,72 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cartridge A01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 80 40 20 0 NM BAR 50 60 power / pressure KW 0 2 4 6 8 10 12 14 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 18 flow / pressure PSI l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 2,6 40 30 25 20 5 1200 rpm 1500 rpm 1800 rpm 2500 rpm
6 BQ01 single pump CartridgeA01-09 flow / pressure power / pressure Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR input torque / pressure CartridgeA01-08 flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 BAR 70 15,6 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR 18,2 10,4 2,6 34 BAR 0 100 150 200 250 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 10 15 20 30 20,4 13,6 6,8 40,8 25 34
7 BQ01 single pump Cartridge A01-11 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 150 50 0 NM BAR 50 100 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 34 20,4 6,8 0 HP 0 50 100 150 200 250 30 35 flow / pressure PSI l/min GPM 90 70 30 20 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 21,2 15,9 10,6 0 0 50 100 150 200 250 5,3 80 60 50 40 10 1200 rpm 1500 rpm 1800 rpm 2500 rpm 40,8 27,2 13,6 Cartridge A01-12 flow / pressure PSI l/min GPM 90 30 10 0 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 70 10,4 60 40 20,8 BAR 100 KW 0 5 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 34 0 HP 0 50 100 150 200 power / pressure 15 20 25 30 27,2 20,4 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 50 0 NM 50 100 150 BAR 26 15,6 5,2 40,8 80 50 20 10 13,6
BQ01 single pump 8 Installation dimensionsmm (inches) Approx. weight: 12 Kg. (26 lbs.) Cartridge A01-14 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 200 100 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 40,8 34 20,4 6,8 0 HP 0 50 100 150 200 30 flow / pressure PSI l/min GPM 120 80 20 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 31,8 21,2 10,6 0 0 50 100 150 200 5,3 100 60 40 1200 rpm 1500 rpm 1800 rpm 2500 rpm 27,2 13,6 26,5 15,9 50 PSI 1450 2175 2900 725 0
BQ01 9 Model code breakdown BQ 01 G * * * * * (L) * (A) Cartridge type 02 05 08 09 11 12 14 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard) 11= Splined 90= Splinet SAE B Spline data (Shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 single pump
BQ01 10 single pump Id. codes of pump components Part No. M8010010 Body Part No. M8020420 Torque to 70 Nm (625 lb. in.) Screw Model 01 11 90 Shaft kit Part No. M8010601 M8010611 M8010690 Model 01 11 90 Shaft Key Part No. K0101000 K0111000 K0190000 Part No. M8010100 - - Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary NBR primary FPM secondary NBR secondary FPM Part No. M8010030 Bearing Part No. M8020120 Cover Part No. M8010040 Seeger Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8010131 M8010132 M8010133 M8010134 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Part No. M8010050 Seeger Cartridge Series A01 A01 Model 02 05 08 09 11 12 14 02 05 08 09 11 12 14 Part No. A0102002 A0105015 A0108035 A0109055 A0111075 A0112095 A0114115 A0102007 A0105025 A0108045 A0109065 A0111085 A0112105 A0114125 Pump Rotat. right hand left hand
11 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 47 to 79 l/min (from 12 to 21 gpm) at 1200 rpm and 7 bar. General description BQ02 Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump A02-12 A02-14 A02-17 A02-19 A02-21 cm3/g 40,1 45,4 55,2 60,0 67,5 (in3/r) (2.45) (2.77) (3.37) (3.66) (4.12) l/min 46,9 52,7 64,2 71,0 79,0 (gpm) (12) (14) (17) (19) (21) l/min 58,8 65,7 80,2 88,7 99,8 (gpm) (15.5) (17.4) (21.2) (23.4) (26.4) bar 210 210 210 210 210 min 600 600 600 600 600 max 2700 2700 2500 2500 2500 (psi) (3050) (3050) (3050) (3050) (3050)
BQ02 single pump 12 250 200 150 100 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peack pres. (0,5 sec.max) 3000 2500 2000 1500 1000 500 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Main operating data 3625 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid(with 0 bar in the intake pipe) intake pipe pressure (BAR)
13 BQ02 single pump Cartridge A02-12 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 200 100 50 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 30 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 27,2 13,6 0 HP 0 50 100 150 200 250 35 40 flow / pressure PSI l/min GPM 100 80 40 30 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 26 20,8 15,6 0 0 50 100 150 200 250 5,2 90 70 60 50 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 10 10,4 Cartridge A02-14 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 15 40 50 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 150 200 BAR 31,2 15,6 68 45 30 25 35 20 50
14 BQ02 single pump Cartridge A02-17 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 250 150 50 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 60 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 36,4 31,2 26 0 0 50 100 150 200 250 5,2 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 15,6 100 20,8 10,4 30 54,4 27,2 100 Cartridge A02-19 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 40 60 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 200 250 BAR 31,2 15,6 81,6 30 20 50 140 160 36,4 41,6 50 68 150
BQ02 single pump 15 Installation dimensionsmm (inches) Approx. weight: 15 Kg. (33 lbs.) Cartridge A02-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 70 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 21 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 10,5 30 54,4 27,2 100 160 180 60 95,2 300
BQ02 16 Model code breakdown BQ 02 G * * * * * (L) * (A) Cartridge type 12 14 17 19 21 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seas in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE B Spline data (Shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BQ02 17 Id. codes of pump components Part No. M8020010 Body Part No. M8020030 Bearing Part No. M8020050 Seeger Part No. M8020040 Seeger Part No. M8020020 Cover Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8020131 M8020132 M8020133 M8020134 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series A02 A02 Model 12 14 17 19 21 12 14 17 19 21 Part No. A0212030 A0214070 A0217110 A0219150 A0221190 A0212040 A0214080 A0217120 A0219160 A0221200 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8020601 M8020611 M8020686 M8020690 Model 01 11 86 90 Shaft Key Part No. K0201000 K0211000 K0286000 K0290000 Part No. M8010100 - M8028600 - single pump Part No. M8020070 Torque to 102 Nm (910 lb. in.) Screw
18 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the cartridges used and the speed of rotation.The pump is available from in two versions with rated capacities 90 to 106 l/mi n (from 24 to 28 gpm) at 1200 rpm and 7 bar. General description BQ03 Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated Capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump A03-24 A03-28 cm3/g 78,3 91,2 (in3/r) (4.78) (5.56) l/min 115,3 131,8 (gpm) (30.5) (34.8) bar 210 210 min 600 600 max 2500 2500 (psi) (3050) (3050) (gpm) (24) (28) l/min 90 106
BQ03 single pump 19 Cartridge A03-24 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 40 80 27,2 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 300 400 BAR 31,2 108,8 30 20 140 160 52 50 200 If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed Main operating data 250 200 150 100 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peack pres. (0,5 sec.max) 3625 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid (with 0 bar in the intake pipe) 3000 2500 2000 1500 1000 500 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 180 200 41,6 60 70 81,6 intake pipe pressure (BAR)
BQ03 single pump 20 Installation dimensionsmm (inches) Approx. weight: 17 Kg. (37 lbs.) Cartridge A03-28 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 300 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 50 90 flow / pressure PSI l/min GPM 50 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 66 52,8 26,4 0 0 50 100 150 200 250 200 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 13,2 30 54,4 27,2 100 250 60 108,8 400 150 39,6 70 80 200
BQ03 21 Model code breakdown BQ 03 G * * * * * * (V) (A) Cartridge types 24 28 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE B Spline data (Shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 13 Pitch 16/32 Major dia. 22.00 - 21.90 (0.866 - 0.862) Pitch dia. 20.638 (0.8125) Minor dia. 18.63 - 18.35 (0.733 - 0.722) Wildhaber 11.67 - 11.70 (0.459 - 0.461) Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BQ03 22 Id. codes of pump components Part No. M8030010 Body Part No. M8020030 Bearing Part No. M8020050 Seeger Part No. M8020040 Seeger Part No. M8030020 Cover Part No. M8020090 Torque to 102 Nm (910 lb. in.) Screw Part No. M8020060 M8020065 M8020061 M8020066 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8020131 M8020132 M8020133 M8020134 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series A03 A03 Model 24 28 24 28 Part No. A0324030 A0328070 A0324040 A0328080 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8030601 M8030611 M8030686 M8030690 Model 01 11 86 90 Shaft Key Part No. K0301000 K0311000 K0386000 K0390000 Part No. M8010100 - M8028600 - single pump
23 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 80 to 140 l/min (from 21 to 38 gpm) at 1200 rpm and 7 bar. General description BQ04 Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump A04-21 A04-25 A04-30 A04-35 A04-38 cm3/g 69,0 81,6 97,7 112,7 121,6 (in3/r) (4.2) (5) (6) (6.9) (7.4) l/min 79,5 94,0 113,8 131,6 139,9 (gpm) (21) (25) (30) (35) (38) l/min 101,4 120,1 141,2 167,2 177,3 (gpm) (26.8) (31.7) (37.3) (44.1) (46.8) bar 210 210 210 210 210 min 600 600 600 600 600 max 2500 2500 2500 2400 2400 (psi) (3050) (3050) (3050) (3050) (3050)
BQ04 single pump 24 250 200 150 100 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peack pres. (0,5 sec.max) 2500 2000 1500 1000 500 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 110% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Main operating data 106% 108% cart. 21, 25, 30 cart. 35,38 3625 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid (with 0 bar in the intake pipe) intake pipe pressure (BAR)
25 BQ04 single pump Cartridge A04-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 300 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 0 HP 0 50 100 150 200 250 50 80 flow / pressure PSI l/min GPM 180 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 21 10,5 30 54,4 27,2 100 140 160 70 60 Cartridge A04-25 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 power / pressure 10 40 90 54,4 27,2 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 300 400 BAR 39,6 30 20 200 250 52,8 66 50 108,8 200 60 80 70
26 BQ04 single pump Cartridge A04-30 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 136 0 HP 0 50 100 150 200 250 120 flow / pressure PSI l/min GPM 250 50 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 66 39,6 0 0 50 100 150 200 250 150 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 26,4 13,2 81,6 27,2 200 200 60 52,8 80 100 108,8 54,4 Cartridge A04-35 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 power / pressure 40 120 54,4 27,2 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM 50 400 600 BAR 39,6 20 200 300 52,8 79,2 136 200 60 100 250 66 80 108,8
BQ04 single pump 27 Installation dimensionsmm (inches) Approx. weight: 23 Kg. (50 lbs.) Cartridge A04-38 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 3625 2400 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 250 140 flow / pressure PSI l/min GPM 50 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 79,2 52,8 26,4 0 0 50 100 150 200 250 200 1200 rpm 1500 rpm 1800 rpm 2400 rpm 100 13,2 54,4 27,2 300 60 190,4 600 150 39,6 80 200 250 66 100 120 163,2 136 108,8
BQ04 28 Model code breakdown BQ 04 G * * * * * (L) * (A) Cartridge type 21 25 30 35 38 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE C Spline data (Shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 14 Pitch 12/24 Major dia. 31.60 - 31.50 (1.244 - 1.240) Pitch dia. 29.634 (1.1667) Minor dia. 26.99 - 26.66 (1.0627 - 1.05) Wildhaber 15.68 - 15.73 (0.617 - 0.619) Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BQ04 29 Id. codes of pump components Part No. M8040140 Body Part No. M8040160 Bearing Part No. M8040180 Seeger Part No. M8040170 Seeger Part No. M8040150 Cover Part No. M8040200 Torque to 225 Nm (2010 lb. in.) Screw Part No. M8040190 M8040195 M8040191 M8040196 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8040241 M8040242 M8040243 M8040244 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series A04 A04 Model 21 25 30 35 38 21 25 30 35 38 Part No. A0421030 A0425070 A0430110 A0435150 A0438190 A0421040 A0425080 A0430120 A0435160 A0438200 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8040601 M8040611 M8040686 M8040690 Model 01 11 86 90 Shaft Key Part No. K0401000 K0411000 K0486000 K0490000 Part No. M8040100 - M8048600 - single pump
30 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five versions with capacities from 164 to 230 l/min (from 42 to 60 gpm) at 1200 rpm and 7 bar. General description BQ05 Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil single pump A05-42 A05-47 A05-50 A05-57 A05-60 cm3/g 138,6 153,5 162,2 183,4 193,4 (in3/r) (8.46) (9.4) (9.9) (11.2) (11.8) l/min 164 180 189 217 230 (gpm) (42) (47) (50) (57) (60) l/min 203,4 222,7 234 267 285 (gpm) (53.7) (58.8) (61.8) (71.2) (75.3) bar 175 175 175 175 175 min 600 600 600 600 600 max 2200 2200 2200 2200 2200 (psi) (2538) (2538) (2538) (2538) (2538)
BQ05 single pump 31 200 150 75 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peack pres. (0,5 sec.max) 2500 2000 1500 1000 500 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 120% 115% 110% 105% 100% 95% 90% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 0,4 5,8 Main operating data 175 125 100 25 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid(with 0 bar in the intake pipe) intake pipe pressure (BAR)
32 BQ05 single pump Cartridge A05-42 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 135 0 HP 0 50 100 150 200 100 flow / pressure PSI l/min GPM 300 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 79,2 39,6 0 0 50 100 150 200 150 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 26,4 13,2 81 27 200 200 60 52,8 80 90 108 54 250 66 10 30 50 70 Cartridge A05-47 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,3 0 HP 0 50 100 150 200 power / pressure 40 120 54,2 27,1 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM 50 400 600 BAR 39,6 20 200 350 52,8 92,4 135,5 200 60 100 250 66 80 108,4 300 79,2 162,6
33 BQ05 single pump Cartridge A05-50 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 162,6 0 HP 0 50 100 150 200 120 flow / pressure PSI l/min GPM 350 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 92,4 39,6 0 0 50 100 150 200 150 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 26,4 13,2 81,3 27,1 200 200 60 52,8 80 108,4 54,2 250 66 300 79,2 100 135,5 Cartridge A05-57 flow / pressure PSI l/min GPM 100 0 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 50 13,2 BAR 150 26,4 KW 0 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 68 0 HP 0 50 100 150 200 power / pressure 25 125 34 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM 50 400 600 BAR 39,6 200 400 52,8 105,6 136 200 50 100 250 66 75 102 300 79,2 170 350 92,4
BQ05 single pump 34 Installation dimensionsmm (inches) Approx. weight: 34 Kg. (75 lbs.) Cartridge A05-60 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 0 HP 0 50 100 150 200 140 flow / pressure PSI l/min GPM 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 118,8 52,8 26,4 0 0 50 100 150 200 200 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 13,2 54,4 27,2 450 60 190,4 600 150 39,6 80 200 250 66 100 120 163,2 136 108,8 300 400 105,6 92,4 79,2 350
Spline data (Shaft 11 and shaft 90) Spline Involute side fit (ASA B5.15) Pressure angle 30° No. of teeth 14 Pitch 12/24 Major dia. 31.60 - 31.50 (1.244 - 1.240) Pitch dia. 29.634 (1.1667) Minor dia. 26.99 - 26.66 (1.0627 - 1.05) Wildhaber 15.68 - 15.73 (0.617 - 0.619) BQ05 35 Model code breakdown BQ 05 G * * * * * (L) * (A) Cartridge type 42 47 50 57 60 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Pump type Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Mounting (omit if not required) Shaft optionsmm (inches) PORT ORIENTATIONS Pump series Design Seals (omit with standard seals and one shaft-seal in NBR) V= seals and shaft-seal in FPM (Viton®) D= standard seals and double shaft-seals in NBR F= seals and double shaft-seals in FPM (Viton®) Shaft end options 01= Straight with key (standard), 11= Splined 86= Heavy duty straight keyed, 90= Splined SAE C Shaft 01 Shaft 11 Shaft 90 Shaft 86 single pump
BQ05 36 Id. codes of pump components Part No. M8050250 Body Part No. M8050270 Bearing Part No. M8050310 Torque to 398 Nm (3550 lb. in.) Screw Part No. M8050300 M8050305 M8050301 M8050306 Shaft seal Type primary in NBR primary in FPM secondary in NBR secondary in FPM Pump seal kit Type NBR NBR FPM (Viton ® ) FPM (Viton ® ) Part No. M8050411 M8050412 M8050413 M8050414 Parts seals + 1 shaft seal seals + 2 shaft seals seals + 1 shaft seal seals + 2 shaft seals Cartridge Series A05 A05 Model 42 47 50 57 60 42 47 50 57 60 Part No. A0542010 A0547030 A0550050 A0557070 A0560090 A0542020 A0547040 A0550060 A0557080 A0560100 Pump rotat. right hand left hand Model 01 11 86 90 Shaft kit Part No. M8050601 M8050611 M8050686 M8050690 Model 01 11 86 90 Shaft Key Part No. K0501000 K0511000 K0586000 K0590000 Part No. M8050100 - M8058600 - single pump Part No. M8050290 Seeger Part No. M8050280 Seeger Part No. M8050260 Cover
BQ21 double pump 37 Fixed displacement vane pump, hydraulically balanced, with capacity determined by the cartridges used and the speed of rotation. The pump is available in several versions with rated capacities from 55 to 134 l/min (from 14 to 35 gpm) at 1200 rpm and 7 bar. General description Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure: (with mineral oil) : from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Maximum pressure Speed range rpm at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil shaft end A02-12 A02-14 A02-17 A02-19 A02-21 cm3/g 40,1 45,4 55,2 60,0 67,5 (in3/r) (2.45) (2.77) (3.37) (3.66) (4.12) l/min 46,9 52,7 64,2 71,0 79,0 (gpm) (12) (14) (17) (19) (21) l/min 58,8 65,7 80,2 88,7 99,8 (gpm) (15.5) (17.4) (21.2) (23.4) (26.4) bar 210 210 210 210 210 min 600 600 600 600 600 max 2700 2700 2500 2500 2500 (psi) (3050) (3050) (3050) (3050) (3050) cover end A01-02 A01-05 A01-08 A01-09 A01-11 A01-12 A01-14 cm3/g 7,2 18,0 27,4 30,1 36,4 39,5 45,9 (in3/r) (0.44) (1.10) (1.67) (1.83) (2.22) (2.41) (2.79) l/min 8,3 20,8 31,8 35,1 42,4 46,9 54,9 (gpm) (2) (5) (8) (9) (11) (12) (14) l/min 10,4 26,1 39,4 44,1 52,6 58,7 69,6 (gpm) (2.8) (6.9) (10.4) (11.7) (13.9) (15.5) (18.4) bar 210 210 210 210 210 160 140 min 600 600 600 600 600 600 600 max 2700 2700 2700 2700 2700 2700 2700 (psi) (3050) (3050) (3050) (3050) (3050) (2300) (2030)
38 If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 intake pipe pressure (BAR) 0,4 5,8 max pressure / hydraulic fluid BAR 250 200 150 100 50 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. peak pres. (0,5 sec.max) 3625 2900 2175 1450 725 0 PSI max speed / hydraulic fluid (with 0 bar in the intake pipe) RPM 3000 2500 2000 1500 500 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid 1000 Main operating data cart. 12, 14 cart. 17, 19, 21 Shaft end cartridge A02-12 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 200 100 50 0 NM BAR 50 150 power / pressure KW 0 5 10 15 20 25 30 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 27,2 13,6 0 HP 0 50 100 150 200 250 35 40 flow / pressure PSI l/min GPM 100 80 40 30 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 26 20,8 15,6 0 0 50 100 150 200 250 5,2 90 70 60 50 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 10 10,4 BQ21 double pump
Shaft end cartridgeA02-14 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 15 40 50 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 150 200 BAR 31,2 15,6 68 45 30 25 35 20 50 Shaft end cartridge A02-17 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 250 150 50 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 60 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 36,4 31,2 26 0 0 50 100 150 200 250 5,2 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 15,6 100 20,8 10,4 30 54,4 27,2 100 39 BQ21 double pump
Shaft end cartridge A02-19 flow / pressure PSI l/min GPM 100 20 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 80 10,4 60 40 20,8 BAR 120 26 5,2 KW 0 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 0 HP 0 50 100 150 200 250 power / pressure 10 40 60 40,8 27,2 13,6 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 100 0 NM 50 200 250 BAR 31,2 15,6 81,6 30 20 50 140 160 36,4 41,6 50 68 150 Shaft end cartridge A02-21 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 0 NM BAR 50 200 power / pressure KW 0 10 20 40 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 13,6 0 HP 0 50 100 150 200 250 50 70 flow / pressure PSI l/min GPM 140 80 40 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 42 31,5 21 0 0 50 100 150 200 250 120 60 20 1200 rpm 1500 rpm 1800 rpm 2500 rpm 100 10,5 30 54,4 27,2 100 160 180 60 95,2 300 40 BQ21 double pump
41 BQ21 double pump Cover end cartridge A01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 80 40 20 0 NM BAR 50 60 power / pressure KW 0 2 4 6 8 10 12 14 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 18 flow / pressure PSI l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 2,6 40 30 25 20 5 1200 rpm 1500 rpm 1800 rpm 2500 rpm l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 3 5 7 8 5,44 2,72 0 100 150 200 250 0 725 1450 2175 2900 3625 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cover end cartridge A01-02 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR input torque / pressure PSI power / pressure PSI flow / pressure PSI
42 BQ21 double pump Cover end cartridge A01-08 flow / pressure PSI l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 BAR 70 15,6 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 50 0 NM 50 100 150 BAR 18,2 10,4 2,6 34 BAR 0 100 150 200 250 0 725 1450 2175 2900 3625 50 0 NM 50 100 150 BAR l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 10 15 20 30 20,4 13,6 6,8 40,8 25 34 Cover end cartridge A01-09 flow / pressure PSI PSI power / pressure Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR input torque / pressure PSI
43 BQ21 Cover end cartridge A01-11 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 250 input torque / pressure 0 725 1450 2175 2900 3625 PSI 150 50 0 NM BAR 50 100 power / pressure KW 0 5 10 15 20 25 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 34 20,4 6,8 0 HP 0 50 100 150 200 250 30 35 flow / pressure PSI l/min GPM 90 70 30 20 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 21,2 15,9 10,6 0 0 50 100 150 200 250 5,3 80 60 50 40 10 1200 rpm 1500 rpm 1800 rpm 2500 rpm 40,8 27,2 13,6 Cover end cartridge A01-12 flow / pressure PSI l/min GPM 90 30 10 0 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 70 10,4 60 40 20,8 BAR 100 KW 0 5 BAR PSI 0 725 1450 2175 2900 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 34 0 HP 0 50 100 150 200 power / pressure 15 20 25 30 27,2 20,4 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 50 0 NM 50 100 150 BAR 26 15,6 5,2 40,8 80 50 20 10 13,6 double pump
www.jbj.co.ukRkJQdWJsaXNoZXIy NzQyNjQ=