Hydraulic Vane Pumps High Pressure Hydraulic Vane Pumps BD52 Series Technical characteristics P1 P2 S Rated capacity at 0 bar Maximum pressure Geometric displacement 1200 rpm 1500 rpm intermittent continuos Speed range Cartridge model ml/rev. (in3/r) l/min (gpm) l/min (gpm) bar (psi) bar (psi) rpm 45 142,4 (8.69) 170.7 (45.15) 213.6 (56.51) 240 (3500) 210 (3000) 400 - 2200 50 158,5 (9.67) 189.9 (50.25) 237.7 (62.88) 240 (3500) 210 (3000) 400 - 2200 52 164,8 (10.06) 197.5 (52.25) 247.2 (65.40) 240 (3500) 210 (3000) 400 - 2200 62 196,7 (12.00) 235.7 (62.36) 295.0 (78.04) 240 (3500) 210 (3000) 400 - 2200 66 213,3 (13.02) 255.6 (67.62) 319.9 (84.63) 240 (3500) 210 (3000) 400 - 2200 P1 72 227,1 (13.86) 272.2 (72.00) 340.6 (90.11) 240 (3500) 210 (3000) 400 - 2200 03 10,8 (0.66) 12,93 (3.42) 16,2 (4.29) 275 (4000) 240 (3500) 400 - 2800 05 17,2 (1.05) 20,60 (5.45) 25,8 (6.83) 275 (4000) 240 (3500) 400 - 2800 06 21,3 (1.30) 25,52 (6.75) 31,9 (8.44) 275 (4000) 240 (3500) 400 - 2800 08 26,4 (1.61) 31,64 (8.37) 39,6 (10.48) 275 (4000) 240 (3500) 400 - 2800 10 34,1 (2.08) 40,86 (10.81) 51,1 (13.52) 275 (4000) 240 (3500) 400 - 2800 12 37,1 (2.26) 44,45 (11.76) 55,6 (14.71) 275 (4000) 240 (3500) 400 - 2800 14 46,0 (2.81) 55,11 (14.58) 69,0 (18.25) 275 (4000) 240 (3500) 400 - 2800 17 58,3 (3.56) 69,85 (18.48) 87,4 (23.12) 275 (4000) 240 (3500) 400 - 2800 20 63,8 (3.89) 76,47 (20.23) 95,7 (25.32) 275 (4000) 240 (3500) 400 - 2800 22 70,3 (4.29) 84,26 (22.29) 105,4 (27.88) 275 (4000) 240 (3500) 400 - 2800 25 79,3 (4.84) 95,03 (25.14) 118,9 (31.46) 275 (4000) 240 (3500) 400 - 2500 28 88,8 (5.42) 106,41 (28.15) 133,2 (35.24) 210 (3000) 160 (2300) 400 - 2500 P2 31 100,0 (6.10) 119,83 (31.70) 150,0 (39.68) 210 (3000) 160 (2300) 400 - 2500 Hydraulic fluids: anti-wear petroleum base, synthetic fluid, water glycols and invert emulsions. Viscosity range / Viscosity index: with anti-wear petroleum base, from 10 to 2000 cSt. (10 to 108 cSt. recommended). Other fluids from 18 to 2000 cSt. (18 to 108 cSt. recommended). Choose 30 cSt. for max lifetime. Viscosity index: 90° min. Filtration: to maintain contamination level to ISO 18/14 or NAS 1638 class 8. Filters: for the inlet, use strainer with mesh not less than 149 micron abs. (omit strainer with application requiring cold start or when using fire resistant fluids); for the return line - 25 micron abs. or better. Water contamination level: max 0.10% for mineral oil. With other fluids, max 0.05% Intermittent pressure: typically the working time permitted at such pressure is < 30% of the duty cycle. With duty cycles longer than 15 minutes, please contact the jbj Techniques Limited technical office telephone 01737 767493, email: info@jbj.co.uk. Minimum inlet pressure: (with mineral oil 10-65 cSt.): 0,8 bar abs. (3 psi abs.). In the biggest displacements of each series and with the highest speeds, is required an higher inlet pressure. Please consult the specific section for details. In case of tandem pump, supply the inlet port with the highest pressure requested among the pump stages. Operating temperature: with “anti-wear petroleum base” the permitted temperature is: from -18 to +100° C; with water glycol and “water in oil emulsion”: from +10 to +50°C; with synthetic fluid: from -18 to +70°C; with rapeseed and esters: from-20 to + 70°C. During cold start the pumps should be operated at low speed and pressure until fluid warms up to an acceptable viscosity for full power operation. Drive: direct and coaxial by means of a flexible coupling. Low axial and radial loads allowed. Consult specific section for more detail. Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in several versions with rated capacity from 230 to 490 l/min at 1500 rpm and pressure 0 bar. double pump description 38 www.jbj.co.uk/vane-pumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=