Life expectancy-nomogram of control unit faceing radial bearing Life expectancy-nomogram of axial bearing x F r Pressure difference: Δp = 150 bar Gap: X = non-existent Given: Radial load: F = non-existent Speed: n = 1000 rpm Graph to determine service life of axial bearing: Axial bearings are not able to receive any radial force. In order to determine service life of bearing, draw a horizontal line from the Y-axis Δp =150 bar to speed curven = 1000 rpm. By drawing a vertical line from intercept point S1 to the X-axis, you can determine the service life of the bearingLh10by approx 32,000 hours. Wanted: Service life radial bearing. Given: Radial load F = 0.5 kN Gap: X = 18mm Speed n = 1000 rpm Wanted: Service life radial bearing To determine service life of bearing, use radial loadF = 0.5 kNand gapX = 14 mm in order to find intercept point S1. By usingS1, draw r a vertical line to pressure curvesΔp = 250 bar. From this, intercept point S2can be determined. By drawing a horizontal line to speed curven = 2000 rpm, intercept point S3 is found. By drawing a vertical line fromS3 to the x-axis, you can determine the service life of the bearingLh10by approx. 110,000 hours. Pressure difference: Δp = 150 bar Graph to determine service life of radial bearing: 14 www.jbj.co.uk/hydraulic-motors.html #DriveLineHarmony LSHT Hydraulic Motors AE4 Series Characteristics Graphs 2 All parameters at u = 32 mm /s; Θ = 40°C; outlet = pressureless
RkJQdWJsaXNoZXIy NzQyNjQ=